Transfer
Here is a selection of → KNF pumps for the hydrogen value chain and fuel cell systems that can be used for the transfer of the following media:
→ Methanol, methanol-water solution
→ Potash
Methanol, Methanol-water Solution
The following KNF pumps can be used for transferring methanol and methanol-water solutions:
NF 5
FL 10
NF 25
Flow rate: max. 0.07 l/min
Suction height: max. 3 mH2O
Operating pressure: max. 1 bar (rel.)
Flow rate: max. 0.1 l/min
Suction height: max. 2 mH2O
Operating pressure: max. 1 bar (rel.)
Flow rate: max. 0.25 l/min
Suction height: max. 3 mH2O
Operating pressure: max. 1 bar (rel.)
NF 1.25
NF 60
FK 1.1100
Flow rate: max. 0.3 l/min
Suction height: max. 3 mH2O
Operating pressure: max. 6 bar (rel.)
Flow rate: max. 0.6 l/min
Suction height: max. 3 mH2O
Operating pressure: max. 1 bar (rel.)
Flow rate: max. 12.4 l/min
Suction height: max. 4.5 mH2O
Operating pressure: max. 6 bar (rel.)
Oxygen, Cathode Air
The following KNF pumps can be used for transferring oxygen and cathode air:
NMP 820
NMP 830
NMP 850.1.2
Flow rate: max. 2.1 l/min
Ultimate vacuum: max. 330 mbar (abs.)
Operating pressure: max. 1.2 bar (rel.)
Flow rate: max. 3.1 l/min
Ultimate vacuum: max. 250 mbar (abs.)
Operating pressure: max. 1.4 bar (rel.)
Flow rate: max. 8.5 l/min
Ultimate vacuum: max. 60 mbar (abs.)
Operating pressure: max. 2.5 bar (rel.)
NMP 830.1.2 HP
NMS 030
Flow rate: max. 9 l/min
Ultimate vacuum: max. 55 mbar (abs.)
Operating pressure: max. 3 bar (rel.)
Flow rate: max. 12 l/min
Ultimate vacuum: max. 220 mbar (abs.)
Operating pressure: max. 0.2 bar (rel.)
Condensate
The following KNF pumps can be used for transferring condensate:
FF 20
NF 30
FP 1.150
Flow rate: max. 0.23 l/min
Suction height: max. 3.5 mH2O
Operating pressure: max. 3 bar (rel.)
Flow rate: max. 0.3 l/min
Suction height: max. 6 mH2O
Operating pressure: max. 1 bar (rel.)
Flow rate: max. 1.1 l/min
Suction height: max. 2.3 mH2O
Operating pressure: max. 6 bar (rel.)
Process Water
The following KNF pumps can be used for transferring process water:
FEM 1.02
FEM 1.09
NF 1.25
FP 70
FK 1.1100
Flow rate: max. 0.02 l/min
Suction height: max. 4 mH2O
Operating pressure: max. 6 bar (rel.)
Flow rate: max. 0.09 l/min
Suction height: max. 4 mH2O
Operating pressure: max. 6 bar (rel.)
Flow rate: max. 0.3 l/min
Suction height: max. 3 mH2O
Operating pressure: max. 6 bar (rel.)
Flow rate: max. 0.85 l/min
Suction height: max. 3 mH2O
Operating pressure: max. 2 bar (rel.)
Flow rate: max. 12.4 l/min
Suction height: max. 4.5 mH2O
Operating pressure: max. 6 bar (rel.)
Potash
The following KNF pumps can be used for transferring potash:
NF 60
FP 1.150
Flow rate: max. 0.6 l/min
Suction height: max. 3 mH2O
Operating pressure: max. 1 bar (rel.)
Flow rate: max. 1.1 l/min
Suction height: max. 2.3 mH2O
Operating pressure: max. 6 bar (rel.)
Catalyst Ink
The following KNF pumps can be used for transferring catalyst ink:
FMM 20
FP 70
FP 150
FP 400
Flow rate: max. 0.018 l/min
Suction height: max. 3 mH2O
Operating pressure: max. 1 bar (rel.)
Flow rate: max. 0.85 l/min
Suction height: max. 3 mH2O
Operating pressure: max. 2 bar (rel.)
Flow rate: max. 1.5 l/min
Suction height: max. 2.7 mH2O
Operating pressure: max. 2 bar (rel.)
Flow rate: max. 4.6 l/min
Suction height: max. 3 mH2O
Operating pressure: max. 1 bar (rel.)